Audi TT Fuel Flap Removal

104 13
    • 1). Turn the Audi TT off and go to the rear passenger side where the fuel tank flap is located. Push in on the outer edge of the flap to unlatch it and pop it open.

    • 2). Locate the three Phillips head screws that lie along the inside rim of the fuel flap collar equidistance from each other. Unscrew each screw and keep the screws somewhere safe for possible reuse. Slide a flat-head screwdriver into the seam between the inside rim and car body. The collar is also cemented onto the body panel, but it can be separated with a light rocking back and forth.

    • 3). Pull the collar with the fuel flap off the body panel slowly as it is still attached to the door sensor. The door sensor tells the Audi TT when the fuel flap is open and when it is closed. Unplug the door sensor from the fuel flap collar and drape it down on the side. If you are going to paint the Audi TT with the fuel flap off, tape over the hole to prevent paint from sealing the gas cap shut.

Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time

Leave A Reply

Your email address will not be published.